Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
Radiator: Service and Repair
Removal and Installation
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE RADIATOR GRILLE.
3. DISCONNECT UPPER RADIATOR HOSE
4. DISCONNECT RADIATOR RESERVOIR HOSE
5. DISCONNECT LOWER RADIATOR HOSE
6. REMOVE RADIATOR NO.2 FAN SHROUD
7. A/T: DISCONNECT OIL COOLER HOSES
8. REMOVE RADIATOR
Remove the 4 bolts and the radiator.
Torque: 12 Nm (120 kgf-cm, 8.7 ft. lbs.)
HINT: Insert the tabs of the radiator support through the radiator service holes.