Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
/Page-382003.png)
REMOVAL
1. REMOVE TIMING BELT
2. REMOVE WATER INLET AND THERMOSTAT
3. DISCONNECT NO.2 OIL COOLER HOSE FROM WATER PUMP
4. REMOVE WATER PUMP
a. Remove the 7 bolts.
b. Pry out the water pump.
INSPECTION
1. INSPECT WATER PUMP
a. Visually check the drain hole for coolant leakage.
If leakage is found, replace the water pump.
If engine coolant has leaked onto the timing belt, replace the timing belt.
b. Turn the pulley, and check that the water pump bearing moves smoothly and quietly.
If necessary, replace the water pump.
2. INSPECT FLUID COUPLING
