Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor
REPLACEMENT
1. REMOVE NO.2 TIMING BELT COVER
2. REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
3. REINSTALL NEW CAMSHAFT POSITION SENSOR
a. Install a new sensor with the bolt.
Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf)
b. Connect the sensor connector.