Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
Using an ohmmeter, measure the resistance between the terminals.
Resistance: Refer to the graph
If the resistance is not as specified, replace the ECT sensor.
7. REINSTALL ECT SENSOR
a. Install a new gasket to the ECT sensor.
b. Using a 19 mm deep socket, install the ECT sensor.
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)
c. Connect the ECT sensor connector.
8. REINSTALL FUEL PIPE
Install the fuel pipe with 4 new gaskets and the 2 union bolts.
Torque: 34.3 N.m (350 kgf.cm, 25 ft.lbf)
9. REINSTALL NO.2 TIMING BELT COVER
10. RECONNECT UPPER RADIATOR HOSE TO WATER OUTLET
11. REFILL WITH ENGINE COOLANT