toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Engine Controls - A/F And O2 Sensor Identification|Page 2033 > < Knock Sensor|Locations|Page 2028
Page 1
background image

Oxygen Sensor: Technical Service Bulletins
Engine Controls - A/F And O2 Sensor Identification

T-SB-0398-09

December 23, 2009

Engine Bank 1 and Bank 2 A/F and 02 Identification

Service Category
Engine/Hybrid System

Section
Engine Control

Market
USA

Applicability

TSB SUPERSESSION NOTICE

The information contained in this TSB supersedes TSB No. EG034-07.

^

Applicability has been updated to include 2009 - 2010 model year vehicles and 2006 - 2010 model year Highlander HV.

TSB No. EG034-07 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before
proceeding.

Introduction

This service bulletin provides information on the proper identification of engine bank 1 and engine bank 2 for correct A/F sensor and oxygen sensor
replacement.

This bulletin contains information that identifies engine bank 1 and engine bank 2 on the following engines:
1AZ-FE, 2AZ-FE, 2AZ-FE (PZEV), 1GR-FE, 2GR-FE, 2JZ-GE, 1MZ-FE, 3MZ-FE, 1UR-FE, 3UR-FE, 2UZ-FE 5VZ-FE and 1ZZ-FE.

^

Bank 1 (B1) refers to the bank that includes cylinder No. 1.

^

Bank 2 (B2) refers to the bank opposite bank 1.

^

Sensor 1 (S1) refers to the sensor that is located before the catalytic converters. 

^

Sensor 2 (S2) refers to the sensor that is located after the catalytic converters.

Warranty Information

Engine Controls - A/F And O2 Sensor Identification|Page 2033 > < Knock Sensor|Locations|Page 2028