Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor NO.1 on-vehicle repair
Vehicle Speed Sensor NO.1 A340E
1. DISCONNECT NO.1 VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE NO.1 VEHICLE SPEED SENSOR ASSEMBLY
a. Remove the bolt and No.1 vehicle speed sensor assembly.
b. Remove the speedometer driven gear and O-ring from the No.1 vehicle speed sensor.
Vehicle Speed Sensor NO.1 A340F
3. INSTALL NO.1 VEHICLE SPEED SENSOR ASSEMBLY
a. Coat a new O-ring with ATF.
b. Install the O-ring and speedometer driven gear to the No.1 vehicle speed sensor.
c. Install the No.1 vehicle speed sensor to the extension housing and torque the bolt.
Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)
4. CONNECT NO.1 VEHICLE SPEED SENSOR CONNECTOR
Vehicle Speed Sensor NO.2 A340E
Vehicle speed Sensor NO.2 on-vehicle repair
1. DISCONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE NO.2 VEHICLE SPEED SENSOR
a. Remove the bolt and No.2 vehicle speed sensor.
b. Remove the O-ring from the No.2 vehicle speed sensor.