Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
/Page-413001.png)
Camshaft Position Sensor: Testing and Inspection
ON-VEHICLE INSPECTION
NOTE: "Cold" and "Hot" in these sentences express the temperature of the coils themselves. "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and
"Hot" is from 50 °C (122 °F) to 100 °C (212 °F).
INSPECT CAMSHAFT POSITION SENSOR
a. Disconnect the sensor connector
Resistance
b. Using an ohmmeter, measure the resistance between the terminals.
If the resistance is not as specified, replace the sensor.
c. Reconnect the camshaft position sensor connector.
