Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
CAUTION: Be sure to follow the correct procedure, for removal and installation of the steering wheel pad.
AIRBAG HARNESS
INSPECTION
HINT: The SRS wire harness is integrated with the instrument panel wire harness assembly. All the connectors in the system are a standard yellow
color.
1. VEHICLES NOT INVOLVED IN COLLISION
Do a diagnostic system check. *
2. VEHICLES INVOLVED IN COLLISION
a. Do a diagnostic system check. *
b. Check breaks in all wires of the SRS wire harness, and exposed conductors.
c. Check to see if the SRS wire harness connectors are cracked or chipped.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Codes.
AIRBAG SENSOR ASSEMBLY
VEHICLE NOT INVOLVED IN COLLISION
Check a diagnostic system.
VEHICLE INVOLVED IN COLLISION WITH AIRBAG NOT DEPLOYED
Check a diagnostic system. *
VEHICLE INVOLVED IN COLLISION WITH AIRBAG DEPLOYED
Replace the airbag sensor assembly. *
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
REPLACEMENT REQUIREMENTS
In the following cases, replace the airbag sensor assembly.
-
If the SRS has been deployed in a collision.
-
If the airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the airbag sensor assembly has been dropped.
CAUTION: For removal and installation of the airbag sensor assembly. Be sure to follow the correct procedure.
AIRBAG SENSOR FRONT
INSPECTION
1. VEHICLES NOT INVOLVED IN COLLISION