toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Collision / Non-Collision Inspections|Page 4239 > < Impact Sensor|Locations|Page 4236
Page 1
background image

Impact Sensor: Testing and Inspection
Collision / Non-Collision Inspections

INSPECTION

1. VEHICLES NOT INVOLVED IN COLLISION

Do a diagnostic system check. 

2. VEHICLES INVOLVED IN COLLISION

a. Do a diagnostic system check. *

b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following

items even if the airbag was not deployed:
-

Check the bracket deformation.

-

Check the paint peeling off the bracket.

-

Check the cracks, dents or chips in the case.

-

Check the cracks, dents, chipping and scratches in the connector.

-

Check the peeling off of the label or damage to the serial number.

Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.

See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Displaying & Reading Trouble Codes

Collision / Non-Collision Inspections|Page 4239 > < Impact Sensor|Locations|Page 4236