Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
/Page-154002.png)
-
Never repair a sensor in order to reuse it.
1. REMOVE BATTERY
a. Remove the bolt and battery clamp.
b. Remove the battery and battery carrier.
2. REMOVE FRONT AIRBAG SENSOR RH
a. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with the front airbag sensor installed.
b. Remove the 2 nuts and front airbag sensor RH.
3. REMOVE FRONT AIRBAG SENSOR LH
a. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with the front airbag sensor installed.
b. Remove the 2 bolts and front airbag sensor LH.
INSTALLATION
