Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
SST 09951-60010 (09951-00330, 09951-00490, 09952-06010), 09951-70010 (09951-07360)
NOTICE:
^
Make sure to install the oil seal facing the correct direction.
^
Take care that the oil seal does not get reversed as you install it.
3. INSTALL STEERING RACK
a. Install SST to the rack.
SST 09631-00350
HINT: If necessary, scrape the burrs off the rack teeth end and burnish.
b. Coat SST with power steering fluid.
c. Install the rack into the rack housing.
d. Remove the SST
4. INSTALL OIL SEAL
a. Install SST to the steering rack opposite end.
SST 09631-00350
b. Coat SST with power steering fluid.
c. Coat a new oil seal lip with power steering fluid, and install it by pushing it onto the SST without tilting.
NOTICE: Make sure to install the oil seal facing the correct direction.
d. Remove the SST
5. INSTALL CYLINDER END STOPPER
a. Coat a new O-ring with power steering fluid, and install it to the cylinder end stopper.