Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
If there is any abnormality, replace the shock absorber with a new one.
NOTICE: When discarding the shock absorber, see DISPOSAL.
DISPOSAL
1. FULLY EXTEND SHOCK ABSORBER ROD
2. DRILL HOLE TO REMOVE GAS FROM CYLINDER
Using a drill, make a hole in the cylinder, as shown in the illustration to remove the gas inside.
CAUTION: The discharged gas is harmless, but be careful of chips which may fly up when drilling.
INSTALLATION
Installation is in the reverse order of removal.