toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Transmission Control System Relay, A/T > < A/T - Torque Converter Bolt Installation Precautions|Page 2571

Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)

Page 2
background image

3. MEASURE TORQUE CONVERTER CLUTCH SLEEVE RUNOUT

Temporarily mount the torque converter clutch to the drive plate. Set up a dial indicator.
Maximum runout: 0.30 mm (0.0118 inch) 
If runout is not within the specification, try to correct by reorienting the installation of the torque converter clutch. 

HINT:  Mark the position of the torque converter clutch to ensure correct installation. 

Transmission Control System Relay, A/T > < A/T - Torque Converter Bolt Installation Precautions|Page 2571