toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Starter Motor|Removal and Installation|Page 4782 > < Starter Motor|Removal and Installation|Page 4780
Page 3
background image

a. Disconnect the starter connector.
b. Remove the nut and disconnect the starter wire.

Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)

c. Remove the 2 bolts and starter.

Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)

INSTALLATION

Installation is in the reverse order of removal.

Starter Motor|Removal and Installation|Page 4782 > < Starter Motor|Removal and Installation|Page 4780