Tacoma PreRunner Extra Cab 2WD V6-3.4L (5VZ-FE) (2000)
![background image](/toyota/tacoma_prerunner_extra_cab_2wd/v6-3.4l_(5vz-fe)/Page-815001.png)
Brake Pad: Service and Repair
REPLACEMENT
1. REMOVE FRONT WHEEL
2. INSPECT PAD LINING THICKNESS
Check the pad thickness and replace pads if not within specification.
Minimum thickness: 1.0 mm (0.039 inch)
3. REMOVE CLIP, 2 PINS AND ANTI-RATTLE SPRING
4. REMOVE 2 PADS AND 4 ANTI-SQUEAL SHIMS
NOTICE: The anti-rattle spring can be used again provided that they have sufficient rebound, no deformation, cracks or wear, and have had all
rust, dirt and foreign particles cleaned off.
5. CHECK DISC THICKNESS AND RUNOUT