Tacoma PreRunner Extra Cab 2WD V6-3.4L (5VZ-FE) (2000)
2. Align the timing marks (1 dot mark) of the camshaft drive and driven gears.
3. Place the exhaust camshaft on the cylinder head.
4. Install the 4 bearing caps in their proper locations.
5. Apply a light coat of engine oil on the threads and under the heads of bearing cap bolts.
6. Install and uniformly tighten the 8 bearing cap bolts, in several passes.
Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)
7. Remove the service bolt.