Tacoma PreRunner Extra Cab 2WD V6-3.4L (5VZ-FE) (2000)
/Page-868001.png)
Generator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. Remove the 3 nuts and end cover.
2. REMOVE BRUSH HOLDER
a. Remove the 2 screws, brush holder and cover.
b. Remove the brush holder cover from the brush holder.
3. REMOVE VOLTAGE REGULATOR
Remove the 3 screws and voltage regulator.
4. REMOVE RECTIFIER HOLDER