Tacoma PreRunner Extra Cab 2WD V6-3.4L (5VZ-FE) (2000)
2. Using SST, tighten the nuts to the specified torque.
SST 09810-38140
Torque: 17 Nm (173 kg.cm, 13 ft.lb)
NOTE: If the nut is over tightened, it may cause cracks on the inside of the insulator.
h. Clean the contact surfaces of the remaining contact plate and plunger with a dry shop rag.
i.
Reinstall the plunger, a new gasket, the end cover and lead clamp (1.8 kW) with the 3 bolts.
Torque:
2.5 Nm (25 kg.cm, 22 in.lb) for 1.4 kW
3.6 Nm (37 kg.cm, 32 in.lb) for 1.8 kW