Tacoma PreRunner Extra Cab 2WD V6-3.4L (5VZ-FE) (2000)
a. Using a screwdriver and hammer, stake back the washer.
NOTICE: Avoid any impact to the steering rack.
b. Using a spanner to hold the steering rack steady, and using SST, remove the rack end.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration. Mark the RH and LH rack ends.
6. REMOVE RACK GUIDE SPRING CAP LOCK NUT
Using SST, remove the nut.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
7. REMOVE RACK GUIDE SPRING CAP
8. REMOVE RACK GUIDE SPRING AND RACK GUIDE
9. REMOVE DUST COVER
10. REMOVE CONTROL VALVE HOUSING WITH CONTROL VALVE ASSEMBLY
a. Place matchmarks on the valve housing and rack housing.
b. Remove the 2 bolts.
c. Pull out the control valve assembly with the valve housing.