Tacoma PreRunner Extra Cab 2WD V6-3.4L (5VZ-FE) (2000)
1. INSTALL NEW BEARING
a. Using SST and a press, install a new bearing to the steering knuckle.
SST 09527-17011, 09950-60020 (09951-00910)
b. Using snap ring pliers, install a snap ring.
2. INSTALL NEW OIL SEAL (OUTSIDE)
a. Using SST and a plastic hammer, install a new oil seal (outside).
SST 09223-15030, 09527-17011
b. Coat the oil seal lip with MP grease.
3. INSTALL AXLE HUB TO STEERING KNUCKLE
a. Install the dust cover to the steering knuckle with the 4 bolts.
Torque: 18 Nm (185 kgf-cm, 13 ft. lbs.)
b. Using SST and a press, install the axle hub to the steering knuckle.
SST 09649-17010
4. INSTALL ABS SPEED SENSOR ROTOR/SPACER
NOTICE: Do not scratch the serration of the speed sensor rotor.
5. w/ Freewheel hub: INSTALL NEW LOCK NUT
a. Using SST, install and torque a new lock nut to the axle hub.
SST 09318-12010
Torque: 274 Nm (2,800 kgf-cm, 203 ft. lbs.)