Tacoma PreRunner Reg Cab 2WD L4-2.7L (3RZ-FE) (1999)
a. Remove the 4 screws, bearing retainer and bearing.
b. Using SST and press, press out the bearing.
SST 09950-60010 (09951-00260, 09952-06010)
c. Using SST and a press, press in a new bearing.
SST 09950-60010 (09951-00500)
d. Install the bearing retainer with the 4 screws.
Torque: 2.6 Nm (26.5 kg.cm, 23 in.lb)
12. INSPECT REAR BEARING
Check that the bearing is not rough or worn.
13. IF NECESSARY, REPLACE REAR BEARING
a. Using SST, remove the bearing covers and bearing.
SST 09820-00021
NOTE: Be careful not to damage the fan.