Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
/Page-292014.png)
NOTICE: Vernier calipers must contact the chain rollers for measuring.
Minimum sprocket diameter with chain:
If the diameter is less than minimum, replace the chain with the sprocket.
2. INSPECT CHAIN TENSIONER SLIPPER AND VIBRATION DAMPERS
Measure the chain tensioner slipper and vibration damper wears.
Maximum wear: 1.0 mm (0.039 inch)
If the wear is greater than maximum, replace the slipper and/or dampers.
3. 2RZ-FE:
INSPECT OIL JET
Check the oil for damage or clogging.
If necessary, replace the oil jet.
4. INSPECT NO.1 CHAIN TENSIONER
5. 3RZ-FE:
INSPECT NO.2 CHAIN TENSIONER
a) Inspect the chain tensioner