Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
SST 09268-45012
t.
Reconnect the fuel inlet pipe to the delivery pipe with 2 new gaskets and the union bolt.
Torque: 29 Nm (300 kg.cm, 22 ft.lb)
u. Reconnect the negative (-) terminal cable to the battery.
v. Check for fuel leakage.
3. INSPECT FUEL PUMP RESISTANCE
Using an ohmmeter, measure the resistance between terminals 4 and 5.
Resistance: 0.2 - 3.0 ohms at 20 ° C (68 ° F)
If the resistance is not specified, replace the fuel pump and/or lead wire.
4. INSPECT FUEL PUMP RESISTANCE
Connect the positive (+) lead from the battery to terminal 4 of the connector, and the negative (-) lead to terminal
5. Check that the fuel pump operates.
NOTE:
-
These tests must be done quickly (within 10 seconds) to prevent the coil from burning out.
-
Keep the fuel pump as far away from the battery as possible.
-
Always do switching at the battery side.
If operation is not as specified, replace the fuel pump and/or lead wire.