Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
-
If the sensor has been dropped, or there are cracks, dents or other defects in the case, brackets or connector, replace the removed sensor
with new one.
-
The front sensor is equipped with an electrical connection check mechanism. Be sure to lock this mechanism securely when connecting the
connector. If the connector is not securely locked, a malfunction code will be detected by the diagnostic system.
b. Connect the front airbag sensor connectors.
2. INSTALL BATTERY
a. Install the battery carrier and battery.
b. Install the battery clamp with the bolt.