Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
a. Using a brass bar and hammer, tap out the bearing from the rack housing.
b. Using SST, press out the bearing from the rack housing.
SST 09950-60010 (09951-00260), 09950-70010 (09951-07200)
c. Coat a new bearing with molybdenum disulfide lithium base grease.
d. Using SST, press in the bearing.
SST 09950-60010 (09951-00310), 09950-70010 (09951-07200)
e. Coat a new bearing with molybdenum disulfide lithium base grease.
f.
Using SST, press in the bearing.
SST 09950-60010 (09951-00320), 09950-70010 (09951-07200)
4. IF NECESSARY, REPLACE OIL SEAL