Tacoma Regular Cab 2WD L4-2.4L (2RZ-FE) (2000)
![background image](/toyota/tacoma_regular_cab_2wd/l4-2.4l_(2rz-fe)/Page-949016.png)
b. Using a plastic hammer and sliding handle, lightly tap in 2 new seats.
NOTICE: Before installing the union seat, remove dust sticking to the control valve housing.
REASSEMBLY
NOTICE: When using a vise, do not overtighten it.
1. COAT WITH POWER STEERING FLUID OR MOLYBDENUM DISULFIDE LITHIUM BASE GREASE
2. INSTALL OIL SEAL
a. Coat a new oil seal lip with power steering fluid.
b. Using SST, press in the oil seal.
SST 09950-60010 (09951-00250, 09951-00420, 09952-06010), 09950-70010 (09951-07360)
NOTICE:
^
Make sure to install the oil seal facing the correct direction.
^
Take care that the oil seal does not get reversed as you install it.
3. INSTALL STEERING RACK
a. Install SST to the rack.
SST 09631-20102
HINT: If necessary, scrape the burrs off the rack teeth end and burnish.