Tacoma Regular Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Valve: Service and Repair
Removal
1. Using Special Service Tool (SST) Valve Spring Compressor # 09202 - 70020 (Attachment # 09202 - 00010) or equivalent, compress the valve
spring and remove the 2 keepers.
2. Remove the spring retainer, valve spring and valve.
3. Using needle-nose pliers, remove the oil seal.
4. Using compressed air and a magnetic finger, remove the spring seat by blowing air.
NOTE: Arrange the valves, valve springs, spring seats and spring retainers in correct order.