Tacoma Regular Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Control Assembly: Service and Repair
Heater Control Assembly
HEATER CONTROL ASSEMBLY REMOVAL
1. REMOVE THESE PARTS:
a. instrument lower finish panel
b. Glove compartment door
2. DISCONNECT HEATER CONTROL CABLES
Control Assembly
3. REMOVE THESE PARTS:
a. Heater control knobs
b. A/C switch
c. A/C control panel
4. REMOVE INSTRUMENT PANEL CENTER LOWER FINISH PANEL
5. REMOVE HEATER CONTROL ASSEMBLY
Remove the 3 screws and heater control assembly, then disconnect the the connectors.
CONTROL ASSEMBLY INSTALLATION