Tacoma Regular Cab 4WD V6-3.4L (5VZ-FE) (1997)
/Page-1609020.png)
b. Coat a new oil seal lip with power steering fluid.
c. Using SST 09950-60010 (09951-00280, 09951-00360, 09952-06010), 09950-70010 (09951-07100), press in the oil seal.
NOTICE: Make sure you install the oil seal facing the correct direction.
5. If necessary, replace oil seal and bearing.
a. Using SST 09950-60010 (09951-00260), 09950-70010 (09951-07150), press out the oil seal and bearing from the control valve housing.
b. Coat a new oil seal lip with power steering fluid.
c. Using SST 09950-60010 (09951-00180, 09951-00330, 09952-06010), 09950-70010 (09951-07150), press in the oil seal.
NOTICE: Make sure you install the oil seal facing the correct direction.
d. Coat a new bearing with molybdenum disulfide lithium base grease.
e. Using SST 09950-60010 (09951-00330), 09950-70010 (09951-07150), press in the bearing.
