Tacoma Regular Cab 4WD V6-3.4L (5VZ-FE) (1997)
Clutch Master Cylinder: Service and Repair
Replacement
REMOVAL
1. Draw out fluid with syringe.
2. Disconnect clutch line.
Using Special Service Tool (SST) 09023-00100, disconnect the line. use a container to catch the fluid.
Torque: 15 N.m (132 inch lbs.)
3. Remove clip and clevis pin.
4. Remove mounting nuts and pull out master cylinder.
Torque: 13 N.m (108 inch lbs.)
INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, bleed system and adjust clutch pedal.