Tercel/Cor. Tercel L4-1452cc 1AC,3A,3AC (1984)
5. REMOVE WATER INLET HOUSING AND THERMOSTAT
6. REMOVE TIMING BELT UPPER COVER
7. DISCONNECT HEATER OUTLET HOSE FROM OUTLET PIPE
8. REMOVE HEATER OUTLET PIPE MOUNT BOLT
9. REMOVE OIL LEVEL GAUGE AND GUIDE
(a) Remove the oil level gauge.
(b) Remove the mount bolt, and pull out the oil level gauge guide.
NOTE: After pulling out the oil level gauge guide, be sure to plug the oil pump body hole.
10. REMOVE WATER PUMP
(a) Remove the three bolts and water pump.
(b) Remove the two nuts and heater outlet pipe from the pump body.
CAUTION: Be careful not to get coolant on the timing belt.
INSTALLATION OF WATER PUMP
