Tercel/Cor. Tercel L4-1452cc 1AC,3A,3AC (1984)
Throttle Valve Cable/Linkage: Adjustments
Automatic Transaxle, A132L
Fig. 1 Manual shift linkage adjustment
MANUAL SHIFT LINKAGE
1.
Loosen swivel nut on lever, then push manual lever fully toward right side of vehicle, Fig. 1.
2.
Return lever two notches to Neutral position, then place selector lever in Neutral position.
3.
Manually hold lever tightly toward Reverse range, then tighten swivel nut.
Fig. 2 Throttle cable adjustment
THROTTLE CABLE
1.
Hold accelerator pedal in fully depressed position, then loosen cable adjusting nuts, Fig. 2.
2.
Adjust cable to obtain 0-.04 inch between end of boot and stopper on cable, then tighten adjusting nut.
3.
Fully depress accelerator pedal and recheck adjustment, then road test vehicle.
