toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drive Belt > < Timing Belt Removal|Page 433
Page 7
background image

(e) Torque the through bolt.

Torque:  73 N-m (740 kgf-cm, 54 ft-lbf)

14. Install vacuum switching valves with bracket and ground strap.
15. Install alternator drive belt.
16. If equipped with A/C and/or P/S, install A/C and/or P/S drive belt.
17. Adjust drive belts. 
18. If equipped with A/C and/or P/S, install pipe clamp bolts.
19. Install PCV hoses.
20. A/T: Connect throttle cable, and adjust it.
21. Connect accelerator cable, and adjust it.
22. Install RH engine under cover.
23. Connect negative terminal cable to battery.

Drive Belt > < Timing Belt Removal|Page 433