Tercel Sedan 2-Door L4-1456cc 1.5L SOHC (3E-E) (1991)
/Page-530001.png)
Fuel Pressure Pulsation Damper: Service and Repair
REMOVAL:
1. Disconnect the negative battery cable.
2. Using a wrench, slowly loosen the Fuel Pulsation Damper from the fuel rail.
Removing Fuel Pressure Pulsation Damper
3. If the fuel system is still under pressure, take care to prevent personal injury from spraying fuel.
4. Remove the Fuel Pusation Damper along with the two mounting gaskets.
INSTALLATION:
1. Install the Fuel Pressure Pulsation Damper with new gaskets.
Fuel Pressure Pulsation Damper
2. Torque the Fuel Pressure Pulsation Damper to 22 ft.lbs. (29 N-m).
3. Reconnect the negative battery cable.
4. Start engine and check for fuel leaks.
