toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Differential, Manual Transaxle|Disassembly|Page 1854 > < Differential, Manual Transaxle|Diagrams
Page 1
background image

Differential: Service and Repair
Disassembly

1. REMOVE SIDE BEARING FROM DIFFERENTIAL CASE

a. Using SST, remove the bearings from both sides of the case

SST 09502-10012

b. Remove the speedometer drive gear from the RH side.

2. REMOVE RING GEAR

a. Place matchmarks on the ring gear and the case.
b. Remove the six bolts.

c. Using a plastic hammer, tap on the ring gear to remove it from the case.

3. INSPECT SIDE GEAR BACKLASH

Using a dial indicator, measure the backlash of one side gear while holding one pinion toward the case.

Differential, Manual Transaxle|Disassembly|Page 1854 > < Differential, Manual Transaxle|Diagrams