toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Cruise Control > < Body - Mudguard Installation|Page 4808
Page 3
background image

8.

Secure mudguard at points 3 and 4 to vehicle using screws from kit (see Figure 6).

9.

Wipe and clean mudguard.

10.

Reinstall the rear wheel & tire and torque lugnuts to 76 ft.lbs.

11.

Repeat mudguard installation steps for rear left hand side.

PARTS INFORMATION

RECOMMENDED TOOLS/MATERIALS NEEDED:

^ Drill
^ 7/32" Drill Bit
^ Eye Protection
^ Pneumatic / Electric Wrench
^ 10 mm Socket
^ 50/50 Isopropyl Alcohol & Water Mix
^ Clean Lint Free Cloth
^ Torque Wrench

Cruise Control > < Body - Mudguard Installation|Page 4808