Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) (1995)
/Page-722002.png)
-
Insert a 0.60 mm (0.024 in.) feeler gauge between the throttle stop screw and stop lever.
-
Connect the tester probe of an ohmmeter to the terminals IDL and E2 of the sensor.
-
Gradually turn the sensor clockwise until the ohmmeter deflects, and secure it with the 2 set screws.
-
Recheck the continuity between terminals IDL and E2.
Clearance between Continuity
lever and stop screw (IDL - E2)
0.50 mm (0.020 in) Continuity
0.70 mm (0.028 in) No Continuity
