Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) MFI (1997)
_mfi/Page-397004.png)
(a)
Loosen the No. 1 idler pulley mount bolt, until the pulley is moved slightly by the spring tension.
(b) Slowly turn the crankshaft pulley 2 revolutions from TDC to TDC.
CAUTION: Always turn the crankshaft clockwise.
(c)
Check that each pulley aligns with the timing marks as shown in the illustration.
If the timing marks do not align, remove the timing belt and reinstall it.
(d) Tighten the No. 1 idler pulley bolt.
Torque: 18.5 Nm (185 kg.cm, 13 ft. lbs.)
(e)
Remove the crankshaft pulley bolt.
8. Install timing belt guide.
Install the guide, facing the cup side outward.
9. Install No. 1 timing belt cover.
(a)
Install the gasket to the belt cover.