toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

System Inspection Procedures|Page 4691 > < System Inspection Procedures|Page 4689
Page 1
background image

Control Assembly: Adjustments

A/C CONTROL CABLES ADJUSTMENT

1. SET A/C CONTROL DIALS AND LEVER IN THESE CONDITIONS:

a. Air inlet control dial RECIRC. position
b. Mode control dial "FACE" position
c. Temperature control dial MAX. COOL

2. ADJUST AIR INLET DAMPER CONTROL CABLE

Set the air inlet damper on RECIRC position. install the control cable and lock clamp.

3. ADJUST MODE DAMPER CONTROL CABLE

Set the air inlet Damper on FACE position, install the control cable and lock the clamp.

4. ADJUST AIR MIX DAMPER CONTROL CABLE

Set the air mix damper on COOL position. install the control cable and lock the clamp.

System Inspection Procedures|Page 4691 > < System Inspection Procedures|Page 4689