toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 5313 > < Diagram Information and Instructions|Page 5311
Page 7
background image

F 8 FRONT DOOR COURTESY SW LH

1-Ground: Continuity with driver's door open

Ground Points

Ground Points

Location Of Ground Points (Fig 32)

System Outline

With the ignition SW in ACC position, current flows to TERMINAL 1 of the integration relay, when the ignition SW is turned to ON position, current
flows to TERMINAL 9 of the relay. When the light control SW is turned to TAIL or HEAD position, current is applied to TERMINAL 11 the
integration relay.

LIGHT REMINDER SYSTEM
When the light control SW is in TAIL or HEAD position, the ignition SW in OFF position and the driver's door is opened (Door courtesy SW 
ON), the current flow to TERMINALS 1 and 9 of the integration relay is stopped. As a result, the relay is activated and current flows from 
TERMINAL 3 of the relay --> TERMINAL 7 to --> GROUND, sounding the Light Reminder Buzzer.

Diagram Information and Instructions|Page 5313 > < Diagram Information and Instructions|Page 5311