Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) MFI (1997)
_mfi/Page-319002.png)
4. Pack bearings with grease.
a. Prepare Multipurpose (MP) grease in the palm of your hand.
b. Pack grease into the bearing, continuing until the grease oozes out from the other side.
c. Do the same around the bearing circumference.
5. Install oil seal.
a. Pack the inside of the axle hub and grease cap with MP grease, as shown in the illustration.
b. Install the inner bearing.
c. Using SST 09550-10012 (09552-10010, 09557-10010) and a hammer, install a new oil seal.
d. Coat the oil seal lip with MP grease.