toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2682 > < Component Tests and General Diagnostics|Page 2680
Page 3
background image

(b) If you have no sound scope you can check the injector transmission operate on with your finger. 

If no sound or unusual so and is heard, check the wiring connector, injector or injection signal from the ECM.

2. Inspect injector resistance.

(a) Disconnect the injector connector.

(b) Using an ohmmeter, measures the resistance between the terminals.

Resistance: 13.4 - 14.2 Ohms at 20°C (68°F) 

If the resistance is not as specified, replace the injector.

(c) Reconnect the injector connector.

Component Tests and General Diagnostics|Page 2682 > < Component Tests and General Diagnostics|Page 2680