Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) MFI (1997)
_mfi/Page-1332009.png)
a. Install the brush holder cover to the brush holder.
NOTE: Be careful of the holder Installation direction.
b. Place the voltage regulator together with the brush holder horizontally on the rectifier end frame.
c. Install the 5 screws until there is a clearance of approx. 1.1 mm (0.04 in.) between the brush holder and voltage regulator.
d. Fit the brush holder cover.
B. Type C:
a. Place the seal plate on the rectifier end frame.