Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) MFI (1997)
![background image](/toyota/tercel_sedan_2-door/l4-1497cc_1.5l_dohc_(5e-fe)_mfi/Page-1445001.png)
Wheel Bearing: Testing and Inspection
Check front bearing backlash and axle hub deviation.
1. Remove front wheel.
Torque: 103 Nm (76 ft. lbs.)
2. Remove the 2 bolts, brake caliper and disc.
3. Support the brake caliper securely.
4. Using a dial indicator, check the backlash near the center of the axle hub.
Maximum: 0.05 mm (0.0020 inch)
If the backlash exceeds the maximum, replace the bearing.
5. Using a dial indicator, check the deviation at the surface of the axle hub outside the hub bolt.
Maximum: 0.05 mm (0.0020 inch)
If the deviation exceeds the maximum, replace the bearing.
6. Install the disc, 2 bolts and brake caliper.
Torque: 88 Nm (65 ft. lbs.)