toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Differential, Manual Transaxle|Specifications|Page 3635 > < Differential, Manual Transaxle|Specifications|Page 3633
Page 1
background image

Differential: Service and Repair

NOTE:  For removal and installation procedures refer to "Manual Transmission/Transaxle, Service and Repair."

DISASSEMBLY 

1. Remove side bearing from differential case, as follows:

a. Using Special Service Tool (SST) 09950-00020, 09950-00030, 09950-60010 (09951-00360) or equivalent, remove the bearings from both

sides of the case.  

b. Remove the speedometer drive gear from the Right Hand (RH) side.

2. Remove ring gear, as follows:

a. Place matchmarks on the ring gear and case.

b. Remove the six bolts.
c. Using a plastic hammer, tap the ring gear to remove it from the case.

Differential, Manual Transaxle|Specifications|Page 3635 > < Differential, Manual Transaxle|Specifications|Page 3633