toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Second Coast Brake|Page 1463 > < Second Coast Brake|Page 1461
Page 3
background image

There are two lengths of piston rod.

Piston rod length:
72.9 mm (2.870 in.)
71.4 mm (2.811 in.)

2. INSTALL PISTON ROD

a. Install the washer and spring to the piston rod.

b. Install an E-ring while pushing the piston.

3. INSTALL OIL SEAL RING

a. Apply ATF to the oil seal ring.
b. Install the oil seal ring to the piston.

NOTE:  Do not spread the ring ends more than necessary.

Second Coast Brake|Page 1463 > < Second Coast Brake|Page 1461