Tundra 2WD V6-3.4L (5VZ-FE) (2004)
/Page-1374006.png)
a. Remove the 2 clips and bolt,
b. Using a clip remover, remove the 6 clips labeled A and 7 clips labeled B, 14 clips labeled C and panel.
28. REMOVE MAP LIGHT
a. Using a screwdriver, remove the lens.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws and map light, then disconnect the connector.
29. REMOVE ROOF CONSOLE BOX
a. Remove the 2 screws.
b. Using a screwdriver, remove the roof console box.
