Tundra 2WD V6-3.4L (5VZ-FE) (2004)
![background image](/toyota/tundra_2wd/v6-3.4l_(5vz-fe)/Page-947001.png)
Acceleration/Deceleration Sensor: Service and Repair
DECELERATION SENSOR (w/ ABS)
REMOVAL
1. Passenger side: REMOVE FRONT SEAT
2. REMOVE DECELERATION SENSOR
a. Disconnect the connector.
b. Remove the 2 nuts and sensor.
INSTALLATION
^
Installation is in the reverse order of removal.
^
Check the deceleration sensor zero point calibration.