Tundra 2WD V6-3.4L (5VZ-FE) (2004)
If circuit is as specified, try replacing the amplifier with a new one. If the circuit is not as specified, inspect the circuits connected to other
parts.
(b) Connect the connector to A/C control assembly and inspect wire harness side from the back side, as shown in the chart below.
Test condition:
-
Run engine at idle speed
-
Set on manifold gauge set
If circuit is as specified, try replacing the amplifier with a new one. If the circuit is not as specified, inspect the circuits connected to other
parts.
Component Inspection
INSPECTION