Tundra 2WD V6-3.4L (5VZ-FE) (2004)
![background image](/toyota/tundra_2wd/v6-3.4l_(5vz-fe)/Page-16001.png)
Traction Control Module: Service and Repair
SKID CONTROL ECU
REMOVAL
1. REMOVE INSTRUMENT PANEL
2. REMOVE SKID CONTROL ECU
a. Disconnect the connector.
b. Remove the 2 screws and ECU.
INSTALLATION
^
Installation is in the reverse order of removal.
^
Check the yaw rate sensor and deceleration sensor zero point calibration.